- Serial Number of the Bicycle
- Make of the Bicycle
- Model of the Bicycle
- Your Information (Name, Phone Number, Address, etc.)
How does registering work?
Many stolen bikes are recovered by police but there is no way to identify the owner. With the Bicycle Registration service, you can register your bicycle by serial number in our database and apply the special label you receive to your bike. If your bike is ever stolen, it can be identified and you can prove ownership.
Advise us that your bike has been stolen right away and if/when recovered, you will be notified immediately.
How to apply the sticker?
To maximize its strength, pick a good location for the label on your bike. Look for a smooth surface. Under the top tube near the saddle is a good place. Application works best when the temperature is between 60 and 110 degrees Fahrenheit, you can heat the bike frame with a hair dryer, if necessary.
Clean and dry the surface. Expose about half of the adhesive area and place exactly where you want your label. Peel back the rest of the liner paper and smooth the label on the frame. Press down firmly for about 2 minutes, giving special attention to the edges.
For best results, let the label set for 24 hours before using the bike. Once the label is attached to your bike, if cannot be removed intact. Your bike is now permanently labeled.